Skip to main content
Short answers, with a link to the full story. Not covered here? Email minimalpad@unbox-studio.com.
Yes. It’s an ordinary keyboard to all three, with no drivers.
On a Mac, MinimalPad Studio for Mac. On Windows or Linux, MinimalPad Studio for browser in Chrome or Edge. Both change the same pad. Compare them.
Yes. Your keys, dial and lights are kept on the pad, so it works on any computer with nothing open.Two things need Studio for Mac running: app profiles, because Studio watches which app is in front, and Open app and Open link keys, because Studio does the opening. Without it, the pad stays on Default and those keys do nothing. The same goes for the keys that move between an app’s several layers.
Yes, just not at the same moment. Quit or disconnect one before you connect the other. See Can I use both?
No. You need a USB-C data cable: a charge-only one powers the pad, but nothing else works. See What you need.
No MinimalPad ships with one, because lithium batteries are hard to ship. You only need one for wireless use: a 3.7 V LiPo with a JST PH 2.0 mm connector. See Add a battery.
Yes, with a battery. It pairs with up to five computers and switches between them. See Pair and switch computers.
Yes, in Studio for Mac, separately for each layer: volume, scroll, zoom, the lights, or two keys of your own. See The dial. Studio for browser shows it but can’t change it.Pressing the dial is a key like the others, and both apps can change it.
Yes, in Studio for Mac: up to 8, such as one layer for rating photos in Lightroom and one for editing them. A key or the dial press moves between them. They need firmware 0.9.0, which Studio for Mac installs. See Several layers for one app.
Yes. Use the keys on the Connections & LEDs layer, which you reach by holding the bottom-right key, or Lights in Studio for Mac. In Studio for Mac, each key and each layer, app profiles included, can have a colour of its own too. See Lights and Key and layer lights.
Yes, on a Mac. In Studio for Mac, choose Open app or Open link for a key. See Open an app.
No. Both apps change keys, layers and lights on the pad, and on a Mac the dial too. Only firmware macros, which type a sequence of keys, need your own build of the firmware.
On a Mac, Studio for Mac installs it for you: see Updates. On any computer, you can copy it on by hand: see Update the firmware. Your keys and pairings stay either way.
Yes, without soldering. Every key sits in a hot-swap socket for Kailh Choc low-profile switches. See Swap a switch.
You solder the kit together yourself. The assembled pad arrives built, tested and ready. See Choose your MinimalPad.