Skip to main content
Two things update: the app on your Mac, and the firmware on the pad. Each Studio release carries the firmware it was made with. Studio 0.6.1 carries MinimalPad firmware 0.9.0.

Update the app

Studio looks for a new version once a day and tells you quietly when one is ready, with a badge on its Dock icon. Nothing takes over your screen. To look yourself, choose Check for Updates… from the MinimalPad Studio menu or the menu bar pop-out. Each update shows what changed before it installs. Turn off Check for updates in the pop-out, and Studio only looks when you ask. Updates are signed, and Studio checks the signature before it installs anything.
Studio 0.6.0 saves your profiles in a newer format that Studio 0.5.0 and older can’t open. Before its first save, it keeps a copy of your old profiles beside them, called profiles-v4-backup.json, in ~/Library/Application Support/Minimalpad Studio/.

Update the pad’s firmware

The sidebar footer shows the firmware your pad is running, such as v0.9.0. Its colour says whether the pad needs anything: Point at it to see what to do about it.

Install it from Studio

Studio carries the firmware, so there’s nothing to download. Plug the pad in with a USB-C data cable, click the message in the sidebar footer, and Studio walks you through four steps:
1

Save your keys to the pad

Studio saves anything still waiting before it restarts the pad.
2

Restart the pad for the update

The pad restarts in update mode and shows up as a drive.
Firmware too old to be asked to restart needs a hand: Studio asks you to press the pad’s reset button twice, quickly, and waits for the drive.
3

Copy the firmware onto it

Studio copies the file across. The first time, macOS may ask whether Studio can use removable volumes: allow it.
4

Wait for the pad to come back

Keep the pad plugged in. It restarts by itself and shows its new version.
Your keys, layers, dial, lights and Bluetooth pairings stay on the pad, so you don’t need to pair again. Your profiles are kept on your Mac, so they’re unaffected too. If the lights stay off afterwards, hold the bottom-right key and press the dial.
Keep the pad plugged in for the whole update. If it’s unplugged while the firmware copies, the pad stays in update mode: install it again by hand with Update the firmware.
The steps to do it yourself, on any computer, are in Update the firmware.

Which firmware each feature needs

Studio 0.6.1 carries 0.9.0, so updating from Studio gets you all of them.