Skip to main content
MinimalPad has 16 RGB LEDs underneath the case that produce an underglow effect. You control the lighting by assigning RGB action keys in MinimalPad Studio — when you press those keys on the pad, the lighting changes on the device in real time.
Studio assigns RGB action keys to your layout. It does not provide a live color picker or a preview panel. To adjust the lighting, press the assigned keys on your MinimalPad itself and watch the result directly on the device.

​
Assign an RGB action

1

Open Studio and connect your MinimalPad

Go to studio.minimalmacropad.com in Chrome or Edge, then connect via USB or Bluetooth.
2

Click the key you want to assign

Click any key on the on-screen layout. The action picker opens on the right.
3

Choose Device Controls

Select Device Controls from the action category picker, then browse the RGB actions.
4

Select an RGB action

Choose the action you want from the table below.
5

Click Assign

The action is applied immediately.
6

Save your changes

Click Save to write the assignment to your MinimalPad’s flash memory.

​
Available RGB actions

​
Automatic power saving

The RGB LEDs turn off automatically after 30 seconds of inactivity to conserve battery. They resume as soon as you press any key.
Assign Brightness + and Brightness − to two adjacent keys on a dedicated layer for quick access. If you use the encoder, you can also configure the encoder press to toggle the lighting on and off — see Encoder for details.